iKegger 2.0 | Remote Gas Line & Larger Gas Bottle Adapters

The iKegger 2.0 Remote Gas Line & Larger Gas Bottle Adapters allow you to use your iKegger 2.0 Mini Regulator with external CO₂ sources such as SodaStream cylinders or larger gas bottles. This kit includes the most commonly used setup for separating the gas source from the keg when direct attachment is not possible.

Features:
– Enables remote gas connection between keg and regulator
– Prevents backflow of liquid into the regulator (one-way valve must be used; included with the regulator, not in this kit)
– Suitable for use when laying the keg horizontally

Assembly:
Screw the John Guest fitting onto the check valve of the mini regulator, and the MFL adapter onto the regulator body. Then connect both 8 mm push-fit fittings to the CO₂ line. For safe and easy tightening, we recommend installing the soda stream adapter using the 7-in-1 tool. Please note: The SodaStream adapter is only compatible with SodaStream cylinders with screw thread connections.

Important: This product does not include keg, tap, regulator, or disconnect. Only compatible with the iKegger 2.0 Regulator.

Available Adapter Types:

• SodaStream Adapter
  Allows you to use a SodaStream gas bottle as a CO₂ source instead of disposable cartridges. SodaStream bottles are widely available in supermarkets around the world.

• M10 Thread Gas Bottle Adapter
  Suitable for larger disposable CO₂ bottles with an M10 thread.

• Standard CO₂ Tank Adapter (DIN 477 / 21.8 × 1/14)
  Compatible with large refillable CO₂ bottles. This is the standard thread used on 99% of CO₂ tanks worldwide.

Included:
– 1 × Adapter for iKegger 2.0 Mini Regulator (SodaStream, M10, DIN 477 or all three – depending on selection)
– 1 × Duotight 8 mm to MFL adapter for Mini Regulator
– 1 × 1 m EVABarrier tubing (5 mm ID / 8 mm OD | 5/16”)
– 1 × John Guest push-in fitting 8 mm to 7/16" NC female thread