Auto-Stop Keg Filler | 2.0 | Counter-Pressure + Oxygen Free

Effortlessly transfer beer into a keg from various sources with our innovative device.

Whether you're filling a commercial keg from a pressure fermenter, a homebrew keg from a commercial one, or a mini keg from any source, this tool ensures a seamless process. Say goodbye to oxygen contact, carbonation loss, and beer wastage due to foam overflow—our device stops the transfer automatically once the keg is filled.

To achieve an oxygen-free transfer under pressure, simply

• Flush out your empty vessel with CO2 and connect it to your beer source using our device.
• It is compatible with virtually any beer tap, commercial keg coupler, or homebrew keg post. Whether you're transferring to the iKegger 2.0 tap system or a standard ball lock keg post, our device has you covered.

• The adjustable pressure release valve above the sight glass allows for easy flow control, preventing foaming during the filling process.

• As the sight glass fills with liquid, the floating ball inside rises and blocks the gas outlet, automatically stopping the filling without any manual intervention.

Fill from :

• A ball lock liquid post (found on homebrew kegs, pressure fermenters, and commercial keg couplers with a liquid ball lock post , as shown in the video below )

• A beer tap with a 10mm internal spout (compatible with most common tap diameters like iKegger taps, Nukatap, Intertap, Perlick, and others).

Fill to  :

• an iKegger 2.0 push fitting spout , we recommend 
  (it's optional but much easier if you upgrade the button with  the button clip  so you can leave it locked down while filling - a 3D printed prototype is used in the video below, it's actually stainless steel)
• any vessels with a ball lock liquid post, such as kegs, fermenters, and couplers.
  

 Kit Includes Below items that shown in the photo :

• Flow stopper unit with release valve built on ( item on the left )
• Piece with strap to fit in most type of taps
• Filling hose with Ball Valve
• 5/8 Thread to 8mm hose adapter ( to fit on the commercial couplers liquid out post)
• FFL to 8mm hose duotight adapter to fit on standard liquid disconnects

 

Please note: The package  DOES NOT  include the  steel gas disconnect  as these are included with the  iKegger 2.0 Regulator . You can use any MFL threaded gas ball lock disconnect in its place.