Tap Shank for iKegger Tapping Systems

The Tap Shank for iKegger Tapping Systems allow you to install a tap through the wall of a fridge, freezer, or cooler, connecting directly to your iKegger keg system. Build your own Jockey Box or beer fridge with this simple-to-use kit. All you need to do is drill a 23mm hole in the surface and you'll be set up in minutes!

The Drop Down Options

For iKegger 2.0 Push-Tap
This package includes the 100mm shank, flow control tap, adapters, connections and 2m of hose to connect the iKegger 2.0 tap to an external tap. You need to add the button clip to your iKegger 2.0 if you don't have it already.
 
Includes:
– 1 x 100 mm stainless steel long shank
– 2m EVABarrier tubing 4 mm ID / 8 mm OD
– 1 x Duotight 8 mm push-in to 7/16" female thread
– 1 × Duotight push-in fitting 8 mm to 5/8" female thread
– 1 × Duotight Ball Valve 8 mm
– 1 × iKegger stainless steel flow control tap 
– Flat external and internal washers, brass anchor nut, ring collar

For iKegger 1.0 Tapping Head (Double Ender)
This package includes the 100mm shank, flow control tap, adapters, connections and 2m of hose to connect a ball lock liquid post on a keg (like iKegger 1.0 spears, home brew kegs, and pressure fermenters) to an external tap. 

Includes :
– 1 x 100 mm stainless steel long shank
– 2 m EVABarrier tubing 4 mm ID / 8 mm OD
– 1 x Duotight 8 mm push-in to 7/16" female thread
– 1 × duotight push-in fitting 8 mm to 5/8" female thread
– 1 x NC liquid disconnect (black, 7/16" thread)
– 1 x iKegger stainless steel flow control tap 
– Flat external and internal washers, brass anchor nut, ring collar